1/2"-24" AL-6XN ASTM B675 UNS N08367 welded pipe price per kg

1/2"-24" AL-6XN ASTM B675 UNS N08367 welded pipe price per kg

1. N08367 material introduction

The high nickel(24%) and molybdenum(6.3%) contents of the AL-6XN alloy give it good resistance to chloride stress-corrosion cracking. The molybdenum confers resistance to chloride pitting. The nitrogen contact of AL-6XN alloy serves to further increase pitting resistance and also gives it higher strength than typical 300 series austenitic stainless steels, and thereby often allows it to be used in thinner sections. The high levels of chromium, molybdenum and nitrogen in AL-6XN alloy all serve to produce exceptional corrosion resistance for this formable and weldable stainless steel.

PHYSICAL PROPERTIES

Density Melting Range

0.291lb/in³ 2410 to 2550 °F

8.06G/CM³ 1320 to 1400°C

Magnetic Permeability Electrical Resistivity

(Typical) 0.89

1.0028 (at 200 Oersted)

MECHANICAL PROPERTIES

Mechanical Properties at Room Temperature

The presence of Nitrogen in AL-6XN alloy gives it higher strength than is typical austenitic stainless steels. The material is an extremely stable austenite which does not transform to martensite even under extensive deformation(as exhibited by the alloy’s low magnetic permealility even after heavy deformation). AL-6XN alloy is thus a moderately strong material which still exhibits the ductility and formability of the traditional austenitic stainless steels.

Typical mechanical properties for annealed sheet material are listed below:

Yield Strength 55,000psi

380MPa

Tensile Strength 110,000psi

760MPa

Elongation 45%

Reduction of Area 60%

Hardness R_B 90

BHN 185

R_30T 72

2. AL-6XN N08367 welded pipe MTC we have exported to Malaysia