Zhengzhou Huitong Pipeline Equipment Co.,Ltd.
Zhengzhou Huitong Pipeline Equipment Co., Ltd.
Add to Cart
Inconel 600 Alloy600 UNS N06600 Nickel Alloy Pipe Fittings Butt Welded Seamless Equal Unequal Tee
1. Introduction of Inconel 600 material
Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance. This nickel alloy was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000° F. It is non-magnetic, has excellent mechanical properties, and presents the desirable combination of high strength and good weldability under a wide range of temperatures. The high nickel content in Inconel 600 enables it to retain considerable resistance under reducing conditions, makes it resistant to corrosion by a number of organic and inorganic compounds, gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions.
2. Equivalents of Inconel 600 Tee or Alloy 600 Tee
| STANDARD | UNS | WERKSTOFF NR. | EN | BS | GOST | OR | JIS | AFNOR |
| INCONEL 600 | N06600 | 2.4816 | NiCr15Fe | NA 14 | XH60BT | ЭИ868 | NCF 600 | NC15FE11M |
3.Chemical Composition of Inconel 600 Tee
| Cr | Fe | C | Mn | S | Si | Cu | Ni+Co |
| 14.0-17.0 | 6.0-10.0 | 0.15max | 1.0max | 0.015max | 0.5max | 0.5max | 72.0min |
4.Physical Properties of Inconel 600 Tee
| DENSITY | 8.47 g/cm 3 / 0.306 lb/in 3 |
| MELTING POINT | 1354 – 1413 (°C) / 2470 – 2575 (°F) |
| POISSON’S RATIO | 0.29 |
| SPECIFIC HEAT @ 70°F | 0.103 Btu/lb•°F |
| THERMAL CONDUCTIVITY @ 70°F | 103 Btu•in/ft2•h•°F |
| ELECTRICAL RESISTIVITY @ 70°F | 620 ohm•circ•mil/ft |
| CURIE TEMPERATURE | -192°F |
| MAGNETIC PERMEABILITY | 1.010 @ 200 oersted |
| ANNEALED | 983 – 1010 °C |
| QUENCH | Rapid Air/Water |
5.Inconel 600 Material Testing:
Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
