Zhengzhou Huitong Pipeline Equipment Co.,Ltd.
Zhengzhou Huitong Pipeline Equipment Co., Ltd.
Add to Cart
Inconel 600 DIN 2.4816 UNS N06600 Nickel Alloy Fasteners Bolt
1.What is Bolt?
A bolt is a type of fastener, usually made from metal, that commonly comprises a head at one end, a chamfer at the other, and a shaft characterised by an external helical ridge known as a ‘thread’. Bolts are typically used to hold materials or objects together, or to position objects.
The chamfer at the opposite end of the head provides a slightly bevelled edge which helps with inserting the bolt into holes and nuts. Bolts typically (but not always) require a nut which is applied via torque while the bolt is held in place (or vice versa). Vibration or dynamic loads may loosen nuts, necessitating the use of locknuts, lock washers or thread lockers which can provide resistance to loosening.
2.Inconel 600 Fasteners Specification
| STANDARDS | |||||
| BOZHONG TRADEMARKS | UNS | ASTM | EURONORMS EN | SUS | |
| Incoloy Alloy 600
| N06600 | - | 2.4816 - | - | |
3.Inconel Alloy 600 Fasteners Chemical Composition
| Grade | Ni | Cr | Si | S | Cu | Fe | C | Mn |
| Inconel 600 | 72.00 min | 14.00 – 17.00 | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 0.15 max | 1.00 max |
4.Inconel Alloy 600 Fasteners Mechanical Properties
| Element | Melting Point | Density | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| Inconel 600 | 1413 °C (2580 °F) | 8.47 g/cm3 | Psi – 45,000 , MPa – 310 | Psi – 95,000 , MPa – 655 | 40 % |
5.Hexagon Nut and Bolt Sizes
| METRIC SIZES | ||
 Thread Size D (mm) | Hexagon Size S (mm) | Hexagon Size J (mm) |
| M 10 | 17 | 8 |
| M 12 | 19 | 10 |
| M 14 | 22 | 12 |
| M 16 | 24 | 14 |
| M 18 | 27 | 14 |
| M 20 | 30 | 17 |
| M 22 | 32 | 17 |
| M 24 | 36 | 19 |
| M 27 | 41 | 19 |
| M 30 | 46 | 22 |
| M 33 | 50 | 24 |
| M 36 | 55 | 27 |
| M 39 | 60 | 27 (30) |
| M 42 | 65 | 32 |
| M 45 | 70 | - |
| M 48 | 75 | 36 |
| M 52 | 80 | 36 |
| M 56 | 85 | 41 |
| M 60 | 90 | 46 |
| M 64 | 95 | 46 |
| M 68 | 100 | 50 |
| M 72 | 105 | 55 |
| M 76 | 110 | 60 |
| M 80 | 115 | 65 |
| M 85 | 120 | 70 |
| M 90 | 130 | 70 (75) |
| M 95 | 135 | - |
| M 100 | 145 | 85 |
| M 105 | 150 | - |
| M 110 | 155 | - |
| M 115 | 165 | - |
| M 120 | 170 | - |
| M 125 | 180 | - |
| M 130 | 185 | - |
| M 140 | 200 | - |
| M 150 | 210 | - |
| IMPERIAL SIZES | ||
Thread Size D (inch) | Hexagon Size S * (inch) | Hexagon Size J (inch) |
| 5/8" | 1 1/16" | 1/2" |
| 3/4" | 1 1/4" | 5/8" |
| 7/8" | 1 7/16" | 3/4" |
| 1" | 1 5/8" | 3/4" |
| 1 1/8" | 1 13/16" | 7/8" |
| 1 1/4" | 2" | 7/8" |
| 1 3/8" | 2 3/16" | 1" |
| 1 1/2" | 2 3/8" | 1" |
| 1 5/8" | 2 9/16" | - |
| 1 3/4" | 2 3/4" | 1 1/4" |
| 1 7/8" | 2 15/16" | 1 3/8" |
| 2" | 3 1/8" | 1 5/8" |
| 2 1/4" | 3 1/2" | 1 3/4" |
| 2 1/2" | 3 7/8" | 1 7/8" |
| 2 3/4" | 4 1/4" | 2" |
| 3" | 4 5/8" | 2 1/4" |
| 3 1/4" | 5" | 2 1/4" |
* Heavy hexagon nuts.
6.Types of bolt
§ 3.1 Anchor bolt
§ 3.2 Carriage bolt
§ 3.3 Elevator bolt
§ 3.4 Flange bolt
§ 3.5 Hanger bolt
§ 3.6 Hexagon bolt/Tap bolt
§ 3.7 Lag bolt
§ 3.8 Machine bolt
§ 3.9 Plow bolt
§ 3.10 Sex bolt
§ 3.11 Square head bolt
§ 3.12 Stud bolt
§ 3.13 Timber bolt
§ 3.14 T-head bolt
§ 3.15 Toggle bolt
§ 3.16 U-bolt