Zhengzhou Huitong Pipeline Equipment Co.,Ltd.
Zhengzhou Huitong Pipeline Equipment Co., Ltd.
Add to Cart
ASTM A182 F316Ti Stainless Steel Disc Forging Rings Sleeves as the Drawing
1. 316Ti (UNS S31635) is a titanium stabilised version of 316 molybdenum-bearing austenitic stainless steel. The 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as 304. They also offer higher creep, stress-rupture and tensile strength at elevated temperature. High carbon Stainless Steel 316Ti6 stainless steel can be susceptible to sensitisation, the formation of grain boundary chromium carbides at temperatures between approximately 900 and 1500°F (425 to 815°C) which can result in intergranular corrosion.
2. HT could produce Stainless Steel 316Ti forging parts,Stainless Steel 316Ti forged rings, Stainless Steel 316Ti Rolled Rings,Stainless Steel 316Ti forging flanges, Stainless Steel 316Ti forging round bars, Stainless Steel 316Ti forged disks, Stainless Steel 316Ti forging bushings,Stainless Steel 316Ti forging discs,Stainless Steel 316Ti forged tubes, Stainless Steel 316Ti forging sleeves,Stainless Steel 316Ti forging tube sheets, Stainless Steel 316Ti forging shafts,Stainless Steel 316Ti forging pipes as per the requirement of the client
3. Technical Data
Mechanical Properties
| Temper | Annealed | |
| Tensile Rm | 75 | ksi (min) |
| Tensile Rm | 515 | MPa (min) |
| R.p. 0.2% Yield | 30 | ksi (min) |
| R.p. 0.2% Yield | 205 | MPa (min) |
| Elongation (2” or 4D gl) | 35 | % (min) |
Physical Properties (Room Temperature)
| Specific Heat (0-100°C) | 500 | J.kg-1.°K-1 |
| Thermal Conductivity | 14.6 | W.m -1.°K-1 |
| Thermal Expansion | 16.5 | μm/μm/°C |
| Modulus Elasticity | 193 | GPa |
| Electrical Resistivity | 7.4 | μohm/cm |
| Density | 7.99 | g/cm3 |
Chemical Composition (% by weight)
| Element | Min | Max |
| C | - | 0.08 |
| Si | - | 0.75 |
| Mn | - | 2 |
| P | - | 0.45 |
| S | - | 0.03 |
| Cr | 16 | 18 |
| Mo | 2 | 3 |
| N | - | 0.1 |
| Fe | Balance | |
| Ni | 10 | 14 |
| Ti | 5x%(C+N) | |
4. More Flange Show
5. FAQ
A: We are factory.
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us.